dmesg - Intel Core i5 750

Return To Intel Core i5 750 System Information

CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-26-generic (buildd@lcy01-12) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #28-Ubuntu SMP Tue Aug 11 14:16:32 UTC 2015 (Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cb76ffff] usable
BIOS-e820: [mem 0x00000000cb770000-0x00000000cb77ffff] ACPI data
BIOS-e820: [mem 0x00000000cb780000-0x00000000cb7cffff] ACPI NVS
BIOS-e820: [mem 0x00000000cb7d0000-0x00000000cb7dffff] reserved
BIOS-e820: [mem 0x00000000cb7eb400-0x00000000cbffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000133ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P55M Pro , BIOS P2.30 08/25/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x134000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EBFFF write-through
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 120000000 mask FF0000000 write-back
  3 base 130000000 mask FFC000000 write-back
  4 base 0CC000000 mask FFC000000 uncachable
  5 base 0D0000000 mask FF0000000 uncachable
  6 base 0E0000000 mask FE0000000 uncachable
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 4608MB, range: 256MB, type WB
reg 3, base: 4864MB, range: 64MB, type WB
reg 4, base: 3264MB, range: 64MB, type UC
reg 5, base: 3328MB, range: 256MB, type UC
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 4096M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 7  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3200MB, range: 64MB, type WB
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
reg 6, base: 4864MB, range: 64MB, type WB
e820: update [mem 0xcc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcb770 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x133e00000-0x133ffffff]
 [mem 0x133e00000-0x133ffffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x133dfffff]
 [mem 0x120000000-0x133dfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcb76ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xcb5fffff] page 2M
 [mem 0xcb600000-0xcb76ffff] page 4k
RAMDISK: [mem 0x35836000-0x36c12fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FAA50 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CB770000 000044 (v01 082510 RSDT1155 20100825 MSFT 00000097)
ACPI: FACP 0x00000000CB770200 000084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 0x00000000CB770460 006FB2 (v01 AS252  AS252225 00000225 INTL 20051117)
ACPI: FACS 0x00000000CB780000 000040
ACPI: APIC 0x00000000CB770390 00008C (v01 082510 APIC1155 20100825 MSFT 00000097)
ACPI: MCFG 0x00000000CB770420 00003C (v01 082510 OEMMCFG  20100825 MSFT 00000097)
ACPI: OEMB 0x00000000CB780040 000073 (v01 082510 OEMB1155 20100825 MSFT 00000097)
ACPI: AAFT 0x00000000CB77A460 000027 (v01 082510 OEMAAFT  20100825 MSFT 00000097)
ACPI: GSCI 0x00000000CB7800C0 002024 (v01 082510 GMCHSCI  20100825 MSFT 00000097)
ACPI: DMAR 0x00000000CB7820F0 000090 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
ACPI: SSDT 0x00000000CB7837B0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000133ffffff]
NODE_DATA(0) allocated [mem 0x133ff7000-0x133ffbfff]
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88012f400000-ffff8801335fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x133ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xcb76ffff]
  node   0: [mem 0x100000000-0x133ffffff]
Initmem setup node 0 [mem 0x00001000-0x133ffffff]
On node 0 totalpages: 1046285
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12958 pages used for memmap
  DMA32 zone: 829296 pages, LIFO batch:31
  Normal zone: 3328 pages used for memmap
  Normal zone: 212992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcb770000-0xcb77ffff]
PM: Registered nosave memory: [mem 0xcb780000-0xcb7cffff]
PM: Registered nosave memory: [mem 0xcb7d0000-0xcb7dffff]
PM: Registered nosave memory: [mem 0xcb7e0000-0xcb7ebfff]
PM: Registered nosave memory: [mem 0xcb7ec000-0xcbffffff]
PM: Registered nosave memory: [mem 0xcc000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xcc000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880133c00000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029914
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/linux-SKpZC9/linux-3.19.0/drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90()
Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: American Megatrends Inc.; Ver: P2.30; Product Version: To Be Filled By O.E.M.
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-26-generic #28-Ubuntu
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./P55M Pro , BIOS P2.30 08/25/2010
 ffffffff81b0f5e0 ffffffff81c03d18 ffffffff817c45cf 00000000000008b0
 ffffffff81c03d68 ffffffff81c03d58 ffffffff81076a6a 0000000000001000
 00000000fed90000 ffffffff81aea832 ffffffff81fe401c ffffffff81fe4060
Call Trace:
 [] dump_stack+0x45/0x57
 [] warn_slowpath_common+0x8a/0xc0
 [] warn_slowpath_fmt_taint+0x3f/0x50
 [] ? __early_ioremap.constprop.0+0x14b/0x1d3
 [] warn_invalid_dmar+0x7c/0x90
 [] ? early_iounmap+0x108/0x128
 [] dmar_validate_one_drhd+0xb0/0xf0
 [] dmar_walk_remapping_entries+0x92/0x1d0
 [] detect_intel_iommu+0x52/0xd1
 [] ? xen_swiotlb_init+0x4b0/0x4b0
 [] pci_iommu_alloc+0x4b/0x6e
 [] mem_init+0x17/0x9d
 [] start_kernel+0x246/0x494
 [] ? early_idt_handler_array+0x120/0x120
 [] x86_64_start_reservations+0x2a/0x2c
 [] x86_64_start_kernel+0x143/0x152
---[ end trace 8031790c66e61010 ]---
Memory: 4013504K/4185140K available (8002K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 171636K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2676.078 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5352.15 BogoMIPS (lpj=10704312)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30114 entries in 118 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU: failed to map dmar0
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
CPU1 microcode updated early to revision 0x7, date = 2013-08-20
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2
CPU2 microcode updated early to revision 0x7, date = 2013-08-20
 #3
CPU3 microcode updated early to revision 0x7, date = 2013-08-20
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21408.62 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcb780000-0xcb7cffff] (327680 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:27:09, date: 08/21/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012E738000 001130 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcc000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbdf8000-0xfbdf83ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbdf4000-0xfbdf7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbdfa000-0xfbdfa3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xc880-0xc887]
pci 0000:00:1f.2: reg 0x14: [io  0xc800-0xc803]
pci 0000:00:1f.2: reg 0x18: [io  0xc480-0xc487]
pci 0000:00:1f.2: reg 0x1c: [io  0xc400-0xc403]
pci 0000:00:1f.2: reg 0x20: [io  0xc080-0xc09f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbdfc000-0xfbdfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbdffc00-0xfbdffcff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:06:00.0: [1002:6818] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xfbf80000-0xfbfbffff 64bit]
pci 0000:06:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D1 D2 D3hot
pci 0000:06:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff 64bit]
pci 0000:06:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xd800-0xd8ff]
pci 0000:03:00.0: reg 0x18: [mem 0xcfdff000-0xcfdfffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xcfdf8000-0xcfdfbfff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xfbee0000-0xfbefffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2:   bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xcc000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:06:00.0
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c51] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcb770000-0xcbffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 3]
pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: [io  0x0800-0x087f] could not be reserved
system 00:03: [io  0x0500-0x057f] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io  0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xcbffffff] could not be reserved
system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xcc000000-0xcc3fffff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xcc400000-0xcc7fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcc3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2:   bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [mem 0xcc400000-0xcc7fffff]
pci 0000:00:1c.4:   bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcc000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xcc000000-0xcc3fffff]
pci_bus 0000:05: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xcfd00000-0xcfdfffff 64bit pref]
pci_bus 0000:02: resource 2 [mem 0xcfc00000-0xcfcfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xcc400000-0xcc7fffff]
pci_bus 0000:04: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xcc000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20340K (ffff880035836000 - ffff880036c13000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc7770000-0xcb770000] (64MB) mapped at [ffff8800c7770000-ffff8800cb76ffff]
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1440185229.495:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0102 -> 0103)
pcieport 0000:00:1c.4: enabling device (0102 -> 0103)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbdf8000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbdfa000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e2bfa75c655707fd5a4bc3a9a6cb49e01a16e1f5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 11:532:496
rtc_cmos 00:01: setting system clock to 2015-08-21 19:27:09 UTC (1440185229)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 4 bits of entropy available
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: version 3.0
r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc9000067e000, 00:19:66:f3:49:5e, XID 083000c0 IRQ 24
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc180 irq 25
ata3: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc200 irq 25
ata4: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc280 irq 25
ata5: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xfbdfc000 port 0xfbdfc380 irq 25
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   070H PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: ASUS    DRW-24B1ST, 1.01, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            ASUS     DRW-24B1ST       1.01 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.1: New USB device found, idVendor=045e, idProduct=0730
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Microsoft® Digital Media Keyboard 3000
usb 2-1.1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:0730.0001/input/input5
usb 2-1.3: new high-speed USB device number 4 using ehci-pci
microsoft 0003:045E:0730.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1d.0-1.1/input0
input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:0730.0002/input/input6
tsc: Refined TSC clocksource calibration: 2676.018 MHz
microsoft 0003:045E:0730.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1d.0-1.1/input1
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD20EARS-07MVWB0, 51.0AB51, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-07M AB51 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1.3: New USB device found, idVendor=046d, idProduct=0825
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 2-1.3: SerialNumber: 2D6AAD10
 sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 2-1.5: new low-speed USB device number 5 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD20EARS-07MVWB0, 51.0AB51, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-07M AB51 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 2-1.5: New USB device found, idVendor=1532, idProduct=000d
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Razer Diamondback 3G
usb 2-1.5: Manufacturer: Razer
input: Razer Razer Diamondback 3G as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:1532:000D.0003/input/input7
hid-generic 0003:1532:000D.0003: input,hidraw2: USB HID v1.10 Mouse [Razer Razer Diamondback 3G] on usb-0000:00:1d.0-1.5/input0
ata5: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
random: nonblocking pool is initialized
floppy0: no floppy controllers found
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Nameserver information manager.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000052f (\GPR2) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
media: Linux media interface: v0.10
gpio_ich: GPIO from 436 to 511 on gpio_ich
Linux video capture interface: v2.00
snd_hda_intel 0000:06:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:06:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:06:00.1/sound/card2/input13
sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x20/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Rear Mic=0x1a
sound hdaudioC0D0:      Front Mic=0x1e
sound hdaudioC0D0:      Line=0x1b
sound hdaudioC0D0:      CD=0x1f
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 3779 MBytes.
[fglrx]   vendor: 1002 device: 6818 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
usb 2-1.3: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device  (046d:0825)
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
floppy0: no floppy controllers found
work still pending
Adding 4191476k swap on /dev/sdc6.  Priority:-1 extents:1 across:4191476k FS
EXT4-fs (sdc5): re-mounted. Opts: errors=remount-ro
systemd-journald[250]: Received request to flush runtime journal from PID 1
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1440178045.571:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.571:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.591:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.591:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.591:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.591:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.611:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.611:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.611:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=504 comm="apparmor_parser"
audit: type=1400 audit(1440178045.611:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=504 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
[fglrx] Firegl kernel thread PID: 828
[fglrx] Firegl kernel thread PID: 829
[fglrx] Firegl kernel thread PID: 830
[fglrx] IRQ 28 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f7e4000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f7e8000, size:518000 
[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000 
EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Return To Intel Core i5 750 System Information